EK2-Virtual Keypad

The EK2 is a pre-configured virtual keypad unit that can be wired and used straight away.   Instead of a keypad on the wall, the keypad is on the phone which is then used to give access.

ApplicationsEK2

· Virtual key pad access by using the keypad on the phone. 

· Long range hands free prox reader for a gate.

· Can be installed inside avoiding weather proofing or vandalism issues. 



Features

· User defined PIN from 1-8 digits

· Configurable Range from 3 feet (1M) to 30 feet (10m)

· Power supply 12-24VDC  with a 20mA consumption at 12VDC

· 3 second pulse on successful PIN entry

· Relay rated at 5A @ 12V

· No software is required on the phone or PC.

· Access to an online support knowledge base

 

  EK2 wiring

EK2 Process