Click on the following links to view each phones registration videos:

• iPhone (temporarily discoverable)
• Android (temporarily discoverable)
• Nokia (permanently discoverable)
• Sony Ericsson (permanently discoverable)
• Blackberry (permanently discoverable)
• Motorola (temporarily or permanently discoverable)
• Samsung (permanently discoverable)
• HTC (permanently discoverable)
• Palm (permanently discoverable)
• LG (permanently discoverable)
• Sharp (permanently discoverable)

For more phones models please usethe following links or see your user guide.

• Bluetooth Videos from SIG
• Bluetooth Generic Instructions
• Bluetooth Support from T-Mobile
• Bluetooth Support from Sprint
• Bluetooth support from Verizon
• Bluetooth Support from AT&T

iPhone

Make an Apple 3G iPhone discoverable and pair with ECKey

• From the main menu, touch ‘Settings’.
• Touch ‘General’.
• Touch ‘Bluetooth’.
• Slide the Bluetooth bar to ‘On’.
• The iPhone will be discoverable while on this page.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the iPhone, enter in the PIN (default 1234) touch ‘Connect’
  • If you are using iPhone Version 4 OS and you are not prompted for a PIN within 30 seconds please try the following.
  • Return to Settings->Network->Internet Tethering. 
  • While on this screen with Bluetooth on and whether or not tethering is enabled the iPhone is also discoverable.
• If the PIN is correct the status light will remain lit for 5 seconds. 
• To make the iPhone one of the two hidden phones that can unlock an ECKey EK3 or EK4 without being discoverable, press the administration button twice during this 5 second confirmation.  Note that only two phones can be registered as hidden phones.  The Status Light will show repeating double flashes if successful.  If there are already two devices registered in this way the oldest registered phone will be returned to a standard phone that needs to have its Bluetooth discoverable to unlock/open the door and the new one will be registered as a hidden phone.
• The apple iPhone has successfully paired with an ECKey.

 Due to Apple firmware issues, the following additional steps are sometimes required to make the phone discoverable.

• Touch ‘General’
• Touch ‘Settings’ and slide the ‘Airplane Mode’ to ‘On’ and then ‘ Off’ again.
• Touch ‘General’, ‘Bluetooth’ to return to the Bluetooth screen.

Create short cut to Bluetooth:

• Use the free ECKey iPhone/iPod application an application on is available from to create a short cut on the home page to turn Bluetooth on and Bluetooth discoverability on to trigger ECKey and open the door.   

Video of pairing with EK3

Video of pairing with EK4

Android

Make an Android phone discoverable and pair with ECKey

• From the home page, move to the required screen and select ‘Settings’.
• Select ‘Wireless & networks’.
• Select ‘Bluetooth’ to ensure the tick is green.
• Select ‘Bluetooth Settings’.
• Select ‘Discoverable’.
• The Android will be discoverable for 120 seconds.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the Android phone, enter in the PIN (default 1234) and select ‘Ok’
• If the PIN is correct the status light will remain lit for 5 seconds. 
• To make the Android one of the two hidden phones that can unlock an ECKey EK3 or EK4 without being discoverable, press the administration button twice during this 5 second confirmation.  Note that only two phones can be registered as hidden phones.  The Status Light will show repeating double flashes if successful.  If there are already two devices registered in this way the oldest registered phone will be returned to a standard phone that needs to have its Bluetooth discoverable to unlock/open the door and the new one will be registered as a hidden phone.
• The Android phone has successfully paired with an ECKey.

 ECKey Android Widget:

•  Click here or visit the Market on your Android phone
• Click search and enter "ECKey"
• Select "ECKey Bluetooth Widget"
• Select "Install"
• Return to the home page
• Add Widget to the home page
  • Long click on the home page
  • Select "Widgets"
  • Select "ECKey Bluetooth Widget"
  • Select "Add widget"
• Click widget to toggle Bluetooth.  Red = Bluetooth off, Blue = Bluetooth on & hidden, Green = Bluetooth on & discoverable

Create short cut to Bluetooth:

• Long click on the home page
• Select "Shortcuts"
• Scroll down and select "Settings"
• Select "Bluetooth settings" - This creates a shortcut to the Bluetooth settings.

Back to the top.

Nokia

Make a Nokia N81 discoverable and pair with ECKey

• Enter the Main Menu. Scroll over to ‘Tools’.
• Scroll over to ‘Bluetooth’.
• Select ‘Bluetooth’.
• Select ‘Bluetooth’ and select ‘On’.
• Scroll down to ‘Bluetooth Settings’.
• Select ‘My Phones Visibility’ and select ‘Shown to all’.
• The Nokia will be permanently discoverable.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the phone, hold the phone where you would like the phone to trigger ECKey.
• Enter in the PIN (default 1234). Then select ‘OK’.
• If the PIN is correct the status light will remain lit for 5 seconds. 
• If the status light does not remain lit for 5 seconds, double check the PIN and repeat again. 
• If the phone still does not pair, refer to the ECKey support center for more information.
• The phone has successfully paired with an ECKey.

Make a Nokia 6230i or 310 discoverable and pair with ECKey

• Enter the Main Menu. Scroll over to ‘Settings’.
• Scroll over to ‘Connectivity’.
• Select ‘Bluetooth’.
• Select ‘Bluetooth’ and select ‘On’.
• Scroll down to ‘Bluetooth Settings’.
• Select ‘My Phones Visibility’ and select ‘Shown to all’.
• The Nokia will be permanently discoverable.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the phone, hold the phone where you would like the phone to trigger ECKey.
• Enter in the PIN (default 1234). Then select ‘OK’.
• If the PIN is correct the status light will remain lit for 5 seconds. 
• If the status light does not remain lit for 5 seconds, double check the PIN and repeat again. 
• If the phone still does not pair, refer to the ECKey support center for more information.
• The phone has successfully paired with an ECKey.

Create short cut to Bluetooth:

• If you have active standby activated then try this: Menu>tools>setting>active standby apps>first shortcut>scroll through and select Bluetooth
• If you do NOT have active standby then try this: Menu>tools>phone>standby mode>active standby>select navigation key>select Bluetooth 

Video of pairing with EK3

Video of pairing with EK4

Sony Ericsson

Make a Sony Ericsson discoverable and pair with ECKey

Note: If a Bluetooth headset is paired with a Sony Ericsson headset it may spend 15 seconds trying to connect to the headset when Bluetooth is first turned on. This can can delay other Bluetooth activity.

Create short cut to Bluetooth:

Menu>settings>general>shortcuts>select navigation keys>edit>settings>connectivity>Bluetooth>shortcut
 

Video of pairing with EK3

Video of pairing with EK4

Blackberry

Make a Blackberry 7100t discoverable and pair with ECKey

• From the Main Menu, scroll over to ‘Settings’.
• Select ‘Turn Bluetooth On’.
• Scroll up to ‘Bluetooth’.
• Press then track wheel button, select ‘Options’.
• Select Discoverable, and select ‘Yes’.
• Save changed settings.
• The Blackbery will be permanently discoverable.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the phone, hold the phone where you would like the phone to trigger ECKey.
• Enter in the PIN (default 1234). Then select ‘OK’.
• If the PIN is correct the status light will remain lit for 5 seconds. 
• If the status light does not remain lit for 5 seconds, double check the PIN and repeat again. 
• If the phone still does not pair, refer to the ECKey support center for more information.
• The phone has successfully paired with an ECKey.

• If you made your Blackberry discoverable you do not need to "Search" or "Listen" for ECKey.  ECKey searchs for  your phone so the Blackberry needs to be able to "listen".  With discoverable = yes in the Bluetooth options this meets that it is always listening. 
• If your Blackberry has discoverable = no in the Bluetooth options then your will need to manually make the Blackberry "Listen" for ECKey to find it or register your Blackberry as a hidden device.  See your ECKey user guide on how to register your phone as a hidden device.
• The Blackberry oftens tried to connect to ECKey and asks to make a connection to ECKey.  ECKey does not require a connection.  If you choose yes the Blackberry will say connection failed.  The Blackberry will still be correctly registered with ECKey and this does not indicate a fault.  This conection fail shows that ECKey will not accept connections (unless it is in administration mode). 

Create short cut to Bluetooth:

• You can move icons to the top of the list and then it shows on your desktop.

Video of pairing with EK3

Video of pairing with EK4

Motorola

Make a Motorola V3, V3i, V3x and RZ3 discoverable and pair with ECKey

• Enter the Main Menu, scroll over to ‘Settings’.
• Scroll down to ‘Connection’.
• Select ‘Bluetooth Link’.
• Scroll down to ‘Setup’.
• Select ‘Power’ and set to ‘On’. This turns on the Bluetooth on the Motorola and sets it to discoverable.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the phone, hold the phone where you would like the phone to trigger ECKey.
• Enter in the PIN (default 1234). Then select ‘OK’.
• If the PIN is correct the status light will remain lit for 5 seconds. 
• If the status light does not remain lit for 5 seconds, double check the PIN and repeat again. 
• If the phone still does not pair, refer to the ECKey support center for more information.
• The phone has successfully paired with an ECKey.
• Note: Motorola only leaves the Bluetooth unconnected in discoverable mode for 60 seconds, after that it sets the Bluetooth to hidden. If the phone has left discoverable mode, select ‘Find Me’ to put the Motorola into discoverable for another 60 seconds.
• To make the Motorola one of the two hidden phones that can unlock an ECKey EK3 or EK4 without being discoverable, press the administration button twice during this 5 second confirmation.  Note that only two phones can be registered as hidden phones.  The Status Light will show repeating double flashes if successful.  If there are already two devices registered in this way the oldest registered phone will be returned to a standard phone that needs to have its Bluetooth discoverable to unlock/open the door and the new one will be registered as a hidden phone.

Video of pairing with EK3

Video of pairing with EK4

Samsung

Make a Samsung Z400v discoverable and pair with ECKey

• Enter the Main Menu, scroll over to ‘Organizer and tools’.
• Scroll down to ‘Bluetooth’.
• Select ‘Activation’ and set to ‘On’.
• Scroll down to ‘My Phones Visibility’, and set to ‘On’.
• The Samsung will be permanently discoverable.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the phone, hold the phone where you would like the phone to trigger ECKey.
• Enter in the PIN (default 1234). Then select ‘OK’.
• If the PIN is correct the status light will remain lit for 5 seconds. 
• If the status light does not remain lit for 5 seconds, double check the PIN and repeat again. 
• If the phone still does not pair, refer to the ECKey support center for more information.
• The phone has successfully paired with an ECKey.

To pair a Samsung SGH-ZV10 with ECKey

• Enter the Main Menu, scroll over to ‘Settings’.
• Scroll down to ‘Connectivity’.
• Select ‘Bluetooth’.
• Select ‘Activation’ and set to ‘On’.
• Scroll down to ‘My Phones Visibility’, and set to ‘On’.
• The Samsung will be permanently discoverable.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the phone, hold the phone where you would like the phone to trigger ECKey.
• Enter in the PIN (default 1234). Then select ‘OK’.
• If the PIN is correct the status light will remain lit for 5 seconds. 
• If the status light does not remain lit for 5 seconds, double check the PIN and repeat again. 
• If the phone still does not pair, refer to the ECKey support center for more information.
• The phone has successfully paired with an ECKey.

Create short cut to Bluetooth:

• Settings>phone settings>shortcuts>select position>scroll through and select Bluetooth

HTC

To pair a HTC Touch with ECKey

• Select ‘Start’ > ‘Settings’ > ‘Connection Tab’ .
• Select ‘Bluetooth’ > ‘Mode’ tab.
• Select ‘Turn on Bluetooth’ and ‘Make this device visible to other devices’.
• Tap ‘Ok’.
• The HTC phone will be permanently discoverable.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the phone, hold the phone where you would like the phone to trigger ECKey.
• Enter in the PIN (default 1234). Then select ‘OK’.
• If the PIN is correct the status light will remain lit for 5 seconds. 
• If the status light does not remain lit for 5 seconds, double check the PIN and repeat again. 
• If the phone still does not pair, refer to the ECKey support center for more information.
• The phone has successfully paired with an ECKey.

Palm

To pair a Palm Treo 700w with ECKey

• Select ‘Start’ > ‘Settings’ > ‘Connection Tab’ .
• Select ‘Bluetooth’ > ‘Mode’ tab.
• Select ‘Turn on Bluetooth’ and ‘Make this device visible to other devices’.
• Tap ‘Ok’.
• The HTC phone will be permanently discoverable.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the phone, hold the phone where you would like the phone to trigger ECKey.
• Enter in the PIN (default 1234). Then select ‘OK’.
• If the PIN is correct the status light will remain lit for 5 seconds. 
• If the status light does not remain lit for 5 seconds, double check the PIN and repeat again. 
• If the phone still does not pair, refer to the ECKey support center for more information.
• The phone has successfully paired with an ECKey.

Make a Google HTC G1 discoverable

• On the Home screen, press the ‘Menu’ key.
• Touch ‘Settings’.
• Touch ‘Wireless controls’.
• Touch ‘Bluetooth’ and turn it on.
• Touch ‘Bluetooth settings’.
• The Google phone will be discoverable.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the phone, hold the phone where you would like the phone to trigger ECKey.
• Select ‘Yes’ and enter in the PIN (default 1234). Then select ‘OK’.
• If the PIN is correct the status light will remain lit for 5 seconds. 
• If the status light does not remain lit for 5 seconds, double check the PIN and repeat again. 
• If the phone still does not pair, refer to the ECKey support center for more information.
• The phone has successfully paired with an ECKey.

LG

Make a LG Incite discoverable

• Tap ‘LG Menu’ > ‘Settings’ > ‘Bluetooth’.
• Select ‘Turn on Bluetooth’ check box in ‘General’ tab
• Select ‘Other devices can discover me’ check box in ‘Accessibility’ tab.
• Tap ‘Ok’.
• The LG phone will be permanently discoverable.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the phone, hold the phone where you would like the phone to trigger ECKey.
• Select ‘Yes’ and enter in the PIN (default 1234). Then select ‘OK’.
• If the PIN is correct the status light will remain lit for 5 seconds. 
• If the status light does not remain lit for 5 seconds, double check the PIN and repeat again. 
• If the phone still does not pair, refer to the ECKey support center for more information.
• The phone has successfully paired with an ECKey.

Make a LG Chocolate discoverable

• Select Menu.
• Select Settings & Tools.
• Select Bluetooth.
• Select Right Soft Key labelled Settings.
• Select Discovery Mode.
• Use the arrows to select Visible.
• Touch OK.
• The LG phone will be permanently discoverable.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the phone, hold the phone where you would like the phone to trigger ECKey.
• Select ‘Yes’ and enter in the PIN (default 1234). Then select ‘OK’.
• If the PIN is correct the status light will remain lit for 5 seconds. 
• If the status light does not remain lit for 5 seconds, double check the PIN and repeat again. 
• If the phone still does not pair, refer to the ECKey support center for more information.
• The phone has successfully paired with an ECKey.

Sharp

The following pairing procedure was carried out on a Sharp GX15.

• Enter the Main Menu, scroll over to ‘Settings’.
• Select ‘Connectivity’.
• Select Bluetooth.
• Select ‘Switch On/Off’ and set to ‘On’.
• Move the phone next to ECKey.
• The status light will flash once every second to indicate that ECKey is trying to pair with a phone.
• When prompted on the phone, hold the phone where you would like the phone to trigger ECKey.
• Select ‘Yes’ and enter in the PIN (default 1234). Then select ‘OK’.
• If the PIN is correct the status light will remain lit for 5 seconds. 
• If the status light does not remain lit for 5 seconds, double check the PIN and repeat again. 
• If the phone still does not pair, refer to the ECKey support center for more information.
• The phone has successfully paired with an ECKey.